Use; Using The Remote Control - Acova Z23290 Instructions For Use Manual

N
CONNECTING PRINCIPLE WITH PILOT WIRE:
Your appliance is equipped with a pilot wire for connection to a pilot wire
programming base unit (not supplied with the appliance).
N (blue or grey)
L (brown)
Pilot wire (black)
CONNECTING PRINCIPLE WITHOUT PILOT WIRE:
If the pilot wire is not connected, it must be insulated for safety reasons. Under
no circumstances must it be connected to earth.
CLASS I COnneCTIOn:
N (blue or grey)
L (brown)
Pilot wire (black)
For other countries (apart from France), the appliance must be installed in
accordance with standards in force and with rules of good professional practice in the
country of use.
The flexible cable supplied with the appliance is designed to be connected to
the mains via a plug.
32
Neutral
Live
Pilot wire (base unit)
Neutral
Live

3. Use

3.1 Using the remote control

3.1.1 Commissioning
Pry off the frame (A). Remove the battery insulation tab and reposition the frame.
After the start-up phase, the set time LED
Immediately press the + or - key to set the time on your remote control.
Press and hold the + or - key to speed up the process.
Once the time is set, wait approximately 10 seconds (or press the P1 or P2 key).
The is no longer displayed and the time has been set.
Please follow the instructions below in the event of an incorrect time setting.
N
is displayed and 00:00 blinks.
33