Functional Description; Installing Or Removing Battery Cartridge - Makita DGA701 Instruction Manual

7 . Do not operate the w ireless unit in places
w here automated devices are near by. If oper-
ated, automated devices may develop malfunction
or error.
8 . Do not operate the w ireless unit in places
under high temperature or places w here
static electricity or electrical noise could be
generated.
9 . The w ireless unit can produce electromagnetic
fields (EMF) but they are not harmful to the
user.
1 0 . The w ireless unit is an accurate instrument. Be
careful not to drop or strike the w ireless unit.
1 1 . Avoid touching the terminal of the w ireless
unit w ith bare hands or metallic materials.
1 2 . Al w ays remove the battery on the product
w hen installing the w ireless unit into it.
1 3 . When opening the lid of the slot, avoid the
place w here dust and w ater may come into the
slot. Al w ays keep the inlet of the slot clean.
1 4 . Al w ays insert the w ireless unit in the correct
direction.
1 5 . Do not press the w ireless activation button
on the w ireless unit too hard and/or press the
button w ith an object w ith a sharp edge.
1 6 . Al w ays close the lid of the slot w hen
operating.
1 7 . Do not remove the w ireless unit from the slot
w hile the po w er is being supplied to the tool.
Doing so may cause a malfunction of the wireless
unit.
1 8 . Do not remove the sticker on the w ireless unit.
1 9 . Do not put any sticker on the w ireless unit.
2 0 . Do not leave the w ireless unit in a place w here
static electricity or electrical noise could be
generated.
2 1 . Do not leave the w ireless unit in a place sub-
ject to high heat, such as a car sitting in the
sun.
2 2 . Do not leave the w ireless unit in a dusty or
po w dery place or in a place corrosive gas
could be generated.
2 3 . Sudden change of the temperature may bede w
the w ireless unit. Do not use the w ireless unit
until the de w is completely dried.
2 4 . When cleaning the w ireless unit, gently w ipe
w ith a dry soft cloth. Do not use benzine, thin-
ner, conductive grease or the like.
2 5 . When storing the w ireless unit, keep it in the
supplied case or a static-free container.
2 6 . Do not insert any devices other than Makita
w ireless unit into the slot on the tool.
2 7 . Do not use the tool w ith the lid of the slot dam-
aged. Water, dust, and dirt come into the slot may
cause malfunction.
2 8 . Do not pull and/or t w ist the lid of the slot more
than necessary. Restore the lid if it comes off
from the tool.
2 9 . Replace the lid of the slot if it is lost or
damaged.
SAVE THESE INSTRUCTIONS.

FUNCTIONAL DESCRIPTION

CAUTION:
Al w ays be sure that the tool is
s w itched off and the battery cartridge is removed
before adjusting or checking function on the tool.

Installing or removing battery cartridge

CAUTION:
Al w ays s w itch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery car-
tridge firmly when installing or removing battery
cartridge. Failure to hold the tool and the battery
cartridge firmly may cause them to slip off your hands
and result in damage to the tool and battery cartridge
and a personal injury.
Fig.1: 1. Red indicator 2. Button 3. Battery cartridge
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
upper side of the button, it is not locked completely.
CAUTION:
Al w ays install the battery cartridge
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the tool, causing injury to
you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
Indicating the remaining battery capacity
Only for battery cartridges with the indicator
Fig.2: 1. Indicator lamps 2. Check button
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for a few seconds.
Indicator lamps
Lighted
13 ENGLISH
Off Blinking
7 5 %
malfunctioned.
Remaining
capacity
to 1 0 0 %
5 0 % to 7 5 %
2 5 % to 5 0 %
0 % to 2 5 %
Charge the
battery.
The battery
may have