Related Manuals for Paslode 360Xi
Summary of Contents for Paslode 360Xi
- Page 1 360Xi FRAMING NAILER www.paslode.co.uk NEVER STOP BUILDING 4303 MANUEL 360Xi _FINAL.indd 1 4303 MANUEL 360Xi _FINAL.indd 1 20/01/2021 11:30 20/01/2021 11:30...
-
Page 2: Technical Data
360Xi FRAMING NAILER CONGRATULATIONS Thank you for choosing a Paslode tool. The 360Xi framing nailer is compact, well-balanced, capable of firing both RounDrive nails and NailScrews. It has an intelligent fuel injection system which delivers all weather ® functioning performance. - Page 3 PLEASE ADHERE TO SAFETY RECOMMENDATIONS & WARNINGS AT ALL TIMES INDEX: • Getting Started Pg 4-5 • Tool Lights Pg 5 • Tool Adjustment Pg 6-7 • Tool Maintenance Pg 8-9 • Trouble Shooting Pg 10 • Paslode Range Pg 11 360Xi Ø = 2.5 > 3.1 mm L = 50 >...
-
Page 4: Getting Started
Check fuel is in date Ø = 2.5 > 3.1 mm (see base of fuel) L = 50 > 90 mm (Smooth & Ring) CLICK ! CLICK ! 4303 MANUEL 360Xi _FINAL.indd 4 4303 MANUEL 360Xi _FINAL.indd 4 20/01/2021 11:30 20/01/2021 11:30... -
Page 5: Led Lights
LED LIGHTS 25% 50% 75% 100% 0 300 RESTING POSITION If you need to rest or place the tool down, please place in the following position: 4303 MANUEL 360Xi _FINAL.indd 5 4303 MANUEL 360Xi _FINAL.indd 5 20/01/2021 11:30 20/01/2021 11:30... - Page 6 TOOL ADJUSTMENTS -15°C 1 000 /hour ≤ T ≤ 4 000 /day +49°C ROTATING BELT HOOK DEPTH OF DRIVE 4303 MANUEL 360Xi _FINAL.indd 6 4303 MANUEL 360Xi _FINAL.indd 6 20/01/2021 11:30 20/01/2021 11:30...
-
Page 7: Actuating The Tool
ACTUATING THE TOOL BANG! BANG! 4303 MANUEL 360Xi _FINAL.indd 7 4303 MANUEL 360Xi _FINAL.indd 7 20/01/2021 11:30 20/01/2021 11:30... -
Page 8: Cleaning Kit
TOOL MAINTENANCE: FILTER CLEANING KIT 013690 TOOL MAINTENANCE: FAN PLEASE USE: • CLEANING KIT 013690 AND THE O RING 013231 013231 4303 MANUEL 360Xi _FINAL.indd 8 4303 MANUEL 360Xi _FINAL.indd 8 20/01/2021 11:31 20/01/2021 11:31... - Page 9 The tool will flash green/red once the tool has fired 50 000 shots. This maintenance light can be reset by holding the start button for 10 seconds. Only reset once maintenance has been carried out on the tool. RESET >10s 4303 MANUEL 360Xi _FINAL.indd 9 4303 MANUEL 360Xi _FINAL.indd 9 20/01/2021 11:31 20/01/2021 11:31...
-
Page 10: Troubleshooting
ISSUE: FAN WORKS AND EXPLOSION HAPPENS HOWEVER NO NAIL OUT BANG! BANG! pg 6 pg 8-9 pg 10 Refer to www.paslode.co.uk for further information on your tool and FAQ. 4303 MANUEL 360Xi _FINAL.indd 10 4303 MANUEL 360Xi _FINAL.indd 10 20/01/2021 11:31 20/01/2021 11:31... -
Page 11: Warranty
IM45 GN IM50 WARRANTY Paslode tools have a standard 2 year warranty, covering all components providing that Manufacturer’s Operating Instructions have been followed, that no modifications have been made or non-original components or spare parts have been used, and that the tool has not been accidentally damaged or neglected. - Page 12 019690-1 11/2020 Route de Lyon F-26500 Bourg-lès-Valence ITWCP UK Glenrothes Fife UK KY6 2SW 4303 MANUEL 360Xi _FINAL.indd 12 4303 MANUEL 360Xi _FINAL.indd 12 20/01/2021 11:31 20/01/2021 11:31...