Page 1
MODEL T200-F18 MODEL T125-F18 Finish Nailers IMPORTANT! OPERATING MANUAL AND DO NOT DESTROY SCHEMATIC It is the customer’s responsibility to have all operators and service personnel read and understand this manual.
INTRODUCTION ® The PASLODE T200-F18 and T125-F18 finish nailers are quality-built tools designed for use in residential trim applications. These tools will deliver efficient, dependable performance when used according to the manufactures guidelines. Please study this manual including the safety instructions to fully understand the operation of these tools.
The tool could fire unexpectedly. DANGER Failure to follow any of the above instructions could result in severe personal injury to tool user and bystanders or cause damage to tool and property. Contact your local Paslode Representative for presentation of Paslode’s Safety Awareness Program...
INSTRUCTIONS FOR LOADING Step No. 1 – Grasp the finish nailer firmly with one hand and press the orange magazine release button at the rear of the magazine and pull the magazine back towards you. Step No. 2 – Insert the strip of 18 gauge finish nails with the point of the fastener facing down and place the point of the fastener into the bottom of the magazine channel.
PARTS LEGEND T200-F18, 500959 T125-F18, 501161 501100 Flat Bar (T200) 500976 Deflector 501180 Flat Bar (T125) 500977 Bolt w/ Flat Washer 501101 Bolt Assembly 500978 Hex Soc. Hd. Screw 501102 Stop 500979 Cap (T200) 501103 Bracket (T200) 501170 Cap (T125)
Page 7
T200-F18 500959 T125-F18 501161 WARNING All parts must be periodically inspected and replaced if worn or broken. Failure to do this can affect the tool’s operation and present a safety hazard.