Seco COM-Express CCOMe-C79 User Manual page 50

USB Overcurrent header
Pin Signal Pin
1 GND 2
3 GND 4
5 GND 6
7 GND 8
CCOMe-C79
CCOMe-C79 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by E.S. Copyright © 2021 SECO S.p.A.
For debugging purposes, onboard it is also available an 8-pin connector,
CN63
type Adimpex p/n LE008208-R or equivalent, for the connection of
USBx_EN_OC# signals.
Signal
USB_0_1_OC#: USB over-current sense signal for USB channels #0 and #1. Active
USB_0_1_OC#
Low Input Signal, electrical level +3.3V_ALW, manged by COM Express module.
USB_2_3_OC#
USB_2_3_OC#: USB over-current sense signal for USB channels #2 and #3. Active
N.C.
Low Input Signal, electrical level +3.3V_ALW, manged by COM Express module.
N.C.
50