Seco COM-Express CCOMe-C79 User Manual page 49

Carrier board for type 7 module on atx form factor
Table of Contents

Advertisement

USB 3.1 ports #2 / #3- CN19
Pin
Signal
Pin
1
+5V
10
USB2
2
USB2-
11
3
USB2+
12
4
GND
13
5
USB_SSRX2-
14
6
USB_SSRX2+
15
7
GND
16
8
USB_SSTX2-
17
9
USB_SSTX2+
18
Signal description:
USB2+/USB2-: USB 2.0 Port #2 differential pair
USB_SSRX2+/USB_SSRX2-: USB Super Speed Port #2 receive differential pair
USB_SSTX2+/USB_SSTX2-: USB Super Speed Port #2 transmit differential pair
USB3+/USB3-: USB 2.0 Port #3 differential pair
USB_SSRX3+/USB_SSRX3-: USB Super Speed Port #3 receive differential pair
USB_SSTX3+/USB_SSTX3-: USB Super Speed Port #3 transmit differential pair
Common mode chokes are placed on all USB differential pairs for EMI compliance
For ESD protection, on all data and voltage lines are placed clamping diodes for voltage transient suppression.
+5V
and +5V
are derived from +5V_ALW through a 1A current limited power switch.
USB2
USB3
Please be aware that USB 3.0 connectivity can be obtained only in case that it is supported by the COM Express module plugged onto the Carrier
Board.
In case the COM Express module used doesn't offer USB 3.0 ports, it will be always possible to use USB 2.0 ports, simply by plugging an USB
2.0 cable. Avoid using USB 3.0 cables if the COM Express module used doesn't offer such an interface.
CCOMe-C79
CCOMe-C79 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by E.S. Copyright © 2021 SECO S.p.A.
The signals of USB 3.0 ports #2 ÷ #3 are carried to another double type-A USB 3.1
stacked receptacle, type Winning p/n WDU3R-18F1B4PBUW3 or equivalent.
More specifically, USB 3.1 port #2 is carried to the lower USB receptacle of CN19, while
Signal
USB 3.1 port #3 is carried to the upper USB receptacle of CN19.
+5V
USB3
Since this connector is a standard type receptacle, it can be connected to all types of
USB3-
USB 1.1 / USB 2.0 / USB 3.0 devices using Standard-A USB 3.0 or USB 2.0 plugs.
USB3+
For USB 3.0 connections it is mandatory the use of SuperSpeed certified cables, whose SuperSpeed
GND
differential pairs are individually shielded inside the global cable's external shielding.
USB_SSRX3-
USB_SSRX3+
GND
USB_SSTX3-
USB_SSTX3+
49

Advertisement

Table of Contents
loading

Table of Contents