Connecting The Router To Your Computer - D-Link DVA-G3340S Quick Installation Manual

Connecting the Router to your
Computer
Antenna:
Ensures good
wireless reception
Phone/ADSL Connections:
Connect to your ADSL line, PSTN
line and analog phones using
standard phone cabling
A. First, connect the power adapter to the power input at the back
panel of the DVA-G3340S and then plug the other end of the
power adapter to a wall outlet or power strip. Press the ON
switch on the back of the unit. On the front of the device, the
Power LED will turn ON to indicate proper operation.
B. Insert one end of the Ethernet cable into an Ethernet (LAN) port
on the back panel of the DVA-G3340S and the other end of the
cable to an Ethernet Adapter or available Ethernet port on your
computer.
C. Insert the telephone cable included with the Router into the
ADSL port, and then connect the cable to your telephone line.
D. Check the LED display on the front of the Router to confirm that
the connections have been made.
LAN Ports:
Connect to the LAN
and other computers
2
Power Input:
Connect to AC
Adapter
Reset:
Push to return to
factory settings