Advertisement
Remote Control Operation
LED power on
(Turning the LEDs On and Off, page
LED power off
LED color-selection wheel
Light: activates when the remote sends a signal to the receiver
LED brightness
LED mode speed
LED display mode
1 2 3
Remote control receiver selection
Turning the LEDs On and Off
After you connect the remote control receiver to the speaker LEDs, you must use the remote control to turn the
LEDs on and off.
1 If you installed more than one receiver, press the group number to select the receiver to control
Additional Receivers to the Remote, page
2 Press
.
The LEDs connected to the receiver turn on with the same color and mode settings applied before the last
time you turned them off.
3 Press
to turn off the LEDs connected to the receiver.
4
(Changing the Color of the LEDs, page
(Changing the Brightness of the LEDs, page
(Changing the Speed of a Display Mode Pattern, page
(Changing the Display Mode of the LEDs, page
(Pairing Additional Receivers to the Remote, page
6).
4)
5)
5)
6)
5)
Wireless RGB LED Remote Control Instructions
6)
(Pairing
Advertisement
