Trouble-shooting
Problem
The water tap leaks.
The display shows F2.
Common occurrence
Situation
The spinning is intermittent after it starts.
Select spin program,but it does not work.
There may be water in the drain hose when
first used.
The wash procedure pauses.
Possible causes
Is the water inlet hose loose?
The water level sensor has
failed.
Redistribute the load evenly.Close the top
lid.
The program is setting the drain time,there
will be a pause before the spin program
starts.
It may be residual water after performance
inspection by the factory.
The cloth sensor is detecting, it will add
water after about 48 senconds.
16
What to do
Fasten the inlet hose.
Please contact Customer
Care.
Cause