Download Print this page

Cleaning Or Maintenance - Haier HWM70-1708T User Manual

Fully automatic top loading
Hide thumbs

Advertisement

Cleaning or Maintenance

Maintenance
Remove the power plug before carrying out any cleaning or maintenance.
Clean the lint filter(s) and detergent box after each wash,otherwise it may influence
you using the machine.
Clean the detergent box and set it on the
control panel seat.
1. The method of dismantling: Push it out
gently.
2. The method of cleaning: Use a brush,
duster cloth to clean it, then flush it with
water.
3. The method of installing : Install it
gently and push it in.
Remove
The filter at the water inlet valve may
become blocked by impurities in the
water supply.Clean it with a plastic
bristled brush every two months.
If the cabinet is dirty,wipe it with a damp cloth
Do not wash directly with water.
Wipe with a neutral detergent(please check
directions on detergent bottle first).
Do not wipe machine with thinners,petrol,
alcohol or other harsh solvents.
1.After washing cycle has finished,turn off the water faucet.(If needed,you can remove
the water inlet hose).
2.Do not store water in the washing machine for a long period without completing a
wash cycle.Drain the water completely after each wash.
3.Hang up the power cord and drain hose.
4.Wipe off any drops of water on the surface of the machine and inside the tub.Leave
the lid open for about 1 hour after each wash to evaporate any residual water.
The lint filter must be used during washing.
It must be cleaned in time after each using.
The mehods of dismantle and install lint filter
as follows:
1.Press the spring piece of the top lint
filter to make the claws out of the filter
cover, and then pull out the lint filter to get
it down.(figure 1).
2.Pull the back of the lint filter, and then you
can get down it off the front cover of the
lint filter.(figure 2).
3.Sweep the lint in the lint filter.
4.Put the back of the lint filter into the front
cover.
5.Put the lint filter into filter cover, and make
it tight.
6.Make sure the lint filter well installed, or it
can influence your use.
Up
Dismantle
Install
Down
Figure 1
14
Back cover
of lint filter
Dismantle
Up
Install
Front cover
Down
of lint filter
Figure 2

Advertisement

loading

  Related Manuals for Haier HWM70-1708T

This manual is also suitable for:

Hwm80-1708tHwm140-1826t