Ubee UBC1329AA00 User Manual page 51

Label Description
When you click on more, a description of the screen information is shown. Click
shrink the description box again.
More
Private Wi-Fi Network Configuration (5GHz)
Wireless
Select Enable to turn on the 5GHz network, or select Disable to turn it off.
Network
This field displays the wireless network name, also called the SSID (service set identifier) for
the primary 5GHz radio. The wireless network name will appear in the list of available
wireless networks for the client device wishing to connect. The default wireless network
name for the 5GHz network is defined as follows:
"WiFi" plus the last 6 characters of the gateway's cable modem (CM) MAC address (all in
upper case), and "-5G" added to the end.
Changing the Wireless Network Name:
You can change the primary network name to a personalized one. Highlight the old SSID
and delete.
Network
Name
(SSID)
Enter your personalized network name and then click Save Settings at the bottom of the
page.
NOTE: If you change the SSID, the device does not revert to the default value when the
device is power cycled, but does revert to this default value if the device is reset to factory
defaults.
Ubee UBC1329AA00 Advanced Wi-Fi 6 Voice Gateway User Manual • February 2021
less to
46