Preparations For Installation - ABB MACHsense-R Instruction Manual

Document type
Instruction manual for MACHsense-R - MSR1600
5.3

Preparations for installation

5.3.1 General
Adequate planning and preparation results in correct installation, assures safe running conditions and
maximum accessibility.
During installation, general as well as local safety instructions must be followed.
5.3.2 Power supply
·
MACHsense-R requires external power supply 110-240 V AC
·
Recommended fuse is 10 A
·
Recommended cable area is 1.5 mm
·
Installation should be made by certified electrician according to local regulations and applicable
standards.
5.3.3 Tools and materials
Suitable materials for set-up as well as other auxiliary tools for installation are normally not included in
the ABB delivery. Auxiliary tools for installation are to be supplied by the customer.
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without
express authority is strictly forbidden.
© Copyright 2017 ABB
Document identity
1MZB100400
2
PROPRIETARY AND SECRET INFORMATION
Revision Page(s)
A 13(31)