Table of Contents
Advertisement
M20011 REL-0000 (2103)
Data Logging
Review settings before starting a data log
To review the settings on the Smart Manometer before starting a
new data log, follow these steps:
1.
From the
until you see DATA LOG.
2. Press the
Description
VERS.
AVAIL.PTS
AVAIL.LOG
TYP.
Interval
PTS.CFG.
TIME CFG.
Starting a data log
1.
From the Home screen, press the
keys until you see
2. Press and hold the
in the display. Data Logging continues for the defined time or
the defined number of points.
3.
Snsr Error
after the test began. This will stop the Data Log.
will appear in the Data Log Pro log.
4. While
DATA LOG
key to see how much time is remaining for the active log.
Stopping a data log
To stop the Data Log at any point or at any time, press and hold
the
Stop
key until
User Manual for Smart Manometer
Home
screen, press the
Information
key to view these seven settings:
Information
(optional)
PRO
maximum number of
points 100 000
maximum number of
logs 128
MEAS, AVG,
AVG+PK, DEMAND
seconds are
expressed in decimal
points
100 (when time is
configured, points is
blank)
------ (when points
are configured, time
is blank)
on screen.
DATA LOG
Start
key until
- means one of the sensors reported an error
is running, you may press the
-- Stopping --
Backward
or
Forward
Information
LITE
maximum number of
points 240
maximum number of
logs 1
MEAS
seconds are
expressed in decimal
points
n/a
n/a
Backward
or the
Forward
appears
-- Starting --
Sensor Error
Information
appears.
key
21 of 60
Advertisement
Table of Contents
