Table of Contents
Advertisement
M20011 REL-0000 (2103)
The display
The bar graph
The bar graph displays a live indication of the current pressure or
temperature applied to a sensor as a percent of FS.
Note: When you press the Information key, the bar graph
displays the remaining state of the charge for the batteries.
Display functions
The Smart Manometer has twelve display functions. It ships with
five display functions active (they appear in
change which displays are active with HHP400 Suite.
Press the
Forward
these modes.
Home
1.
is the default view
with measurement units
2.
MIN
(Minimum)
3.
MAX
(Maximum)
4. RELIEF VALVE TEST
5. + / - (Accuracy)
6.
T.OFF, T.ON
Display function NOT appearing on the Omega Tethered
Sensor
The following display function do not appear on an when you
attach it to the Smart Manometer.
▪
Temperature & Time.
User Manual for Smart Manometer
(or
Backward
in reverse order) key to view
7. AVG (Average)
8. RATE
9.
DATA LOG
10. Temperature & Time
11. LEAK TEST
(Tare)
12. LEAK TEST DURATION
bold
below). You can
15 of 60
Advertisement
Table of Contents
