Heat Sink - HP Chromebook x360 14c Maintenance And Service Manual

Before removing the fan, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Disconnect the battery cable from the system board (see
Remove the fan assembly:
1. Disconnect the fan cable from the system board (1).
2. Remove the three Phillips M2.0 × 3.0 screws (2), and then remove the fan from the computer (3).
Reverse this procedure to install the fan assembly.

Heat sink

To remove the heat sink, use these procedures and illustrations.
Table 5-7 Heat sink description and part number
Description
Heat sink
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Disconnect the battery cable from the system board (see
Remove the heat sink:
1. In the order indicated on the heat sink, remove the four Phillips M2.0 × 3.0 screws (1), and then remove
the heat sink from the computer (2).
28 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page 21).
(Preparation for disassembly on page
(Bottom cover on page 21).
21).
Battery on page 23).
Spare part number
M00325-001
21).
Battery on page 23).