Advertisement
Step 7
You will need
8 x Cam
Phillips head
Bolts (H3)
screwdriver
Screw 4 x cam bolts (H3) into drawer front (P9) with a Phillips head screwdriver.
Repeat for second drawer.
Step 8
You will need
8 x Cam
Phillips head
Nuts (H4)
screwdriver
This is how a cam nut works ........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach drawer sides (P10, P11) to drawer front (P9). Insert 4 x cam nuts (H4) into the
holes of drawer sides (P10, P11). Make sure the opening on cam nuts point towards
the incoming cam bolts. Tighten the cam nuts using a Phillips head screwdriver.
Repeat for second drawer.
www.fantasticfurniture.com.au
H3
(P9)
(P10)
H4
(P9)
x 2
(P11)
x 2
H4
PAGE 8
Advertisement
