Advertisement
Step 3
You will need
6 x Small
Phillips head
Screws (H5)
screwdriver
1 x CR Runner
1 x CL Runner
Tracks (H7)
Tracks (H6)
Attach 1 x CR runner tracks (H7) to left divider (P5) with 3 x small screws (H5). Attach 1 x CL runner
tracks (H6) to right divider (P6) with 3 x small screws (H5). Tighten with a Phillips head screwdriver.
Step 4
You will need
8 x Dowels
Phillips head
(H1)
screwdriver
8 x Cam
Nuts (H4)
This is how a cam nut works ........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach left side panel (P2) ,right side panel (P3) ,left divider (P5) and right divider (P6)
to top panel (P1) with 8x dowels (H1),and secure with 8x cam nuts (H4).
Tighten with a Phillips head screwdriver.
www.fantasticfurniture.com.au
(P6)
H5
(P6)
(P3)
H1
H5
H6
H7
(P5)
(P5)
H4
(P1)
H5
CL
H6
H5
CR
H7
(P2)
H4
H1
PAGE 6
Advertisement
