Configure Mientry - Mircom MiEntry TX3 Series Manual

Hide thumbs Also See for MiEntry TX3 Series:

Table of Contents

2.3

Configure MiEntry

You now have the two pieces of information you need to configure the MiEntry

app to make VOIP calls:

•

Configure MiEntry with an OnSIP account

TX3 MiEntry Manual

SIP username (for example jsmith@mircom.onsip.com)

SIP password

Open the MiEntry app.

Provide the following information as shown in figures 5 and 6.

First field. The first part of the SIP username (before the @)

Second field. The SIP password

Third field. The last part of the SIP username (after the @)

For example, if your SIP username is jsmith@mircom.onsip.com,

then enter jsmith in the first field and mircom.onsip.com in the

third field.

Transport. Leave as is (UDP on iOS and TCP on Android).

Remember Me. Leave this setting On so that you will not have to enter

this information in the future.

First part of

SIP Username

SIP Password

Last part of SIP

Username

Figure 5. MiEntry Registration on iOS

Configuring MiEntry

Table of Contents

Do you have a question about the MiEntry TX3 Series and is the answer not in the manual?