Advertisement
How to hook up the GoGear micro jukebox with my computer?
For Windows98 users, make sure that you have already installed the necessary driver in your PC. The
software and the driver installation must be completed before making any connection or else your
computer cannot recognize GoGear micro jukebox. For WindowsME/2000/XP users, as the GoGear micro
jukebox jukebox supports USB Mass Storage Class, simply hook up your jukebox with your PC via the
supplied USB cable. An application will launch and the unit will be recognized as a USB Mass Storage
device. It is automatically listed as REMOVABLE DISK in Windows Explorer. You do not have to install
a driver for USB connection.
1.
Make sure you connect your GoGear micro jukebox to the main power supply.
2.
Turn on the computer.
(Always turn on the computer before hooking up the jukebox with the USB cab e)
3.
Connect the supplied USB cable to your computer's USB port with the larger plug end of the USB
cable connected to the computer.
4.
Connect the small end of the USB cable to the USB jack of the jukebox.
5.
The unit should display a picture of the PC connecting with the device showing that the connection is
being established.
(Back to the top)
When first connecting the GoGear micro jukebox with the computer AFTER installing the
Digital Media Manager & drivers, the computer finds "New Hardware" and prompts for
drivers. What should I do?
1.
You will be able to solve this problem by disconnecting your GoGear micro jukebox from the PC and
reinstalling the drivers.
2.
Insert the installation CD into the CD ROM drive. Follow the instructions on-screen to complete the
installation.
(Back to the top)
6
l
Advertisement
