iNet Box
Table of Contents
Symbols used ........................................................................ 9
Intended use .......................................................................... 9
Scope of delivery .................................................................. 9
Dimensions ....................................................................... 10
Displays ............................................................................. 10
Installation ........................................................................ 11
Assembly ............................................................................. 11
Symbols used
The appliance must only be installed and repaired by an
expert.
Symbol indicates possible hazards.
Note containing information and tips.
Installation instructions
Safety instructions
In-vehicle installations must comply with
the technical and administrative regu-
lations of the respective country of use
(e.g. EN 1648, VDE 0100-721). National
regulations and rules must be followed.
In other countries, the relevant regu-
lations must be observed.
Intended use
The iNet Box was developed for controlling iNet-capable Truma
appliances via mobile terminal devices (e.g. smartphones,
tablet PCs). Communication is via Bluetooth or GSM.
Scope of delivery
1 iNet Box
4 screws (depending on version)
1 Set of operating instructions
1 Set of installation instructions
1 12 / 24 V connector cable (+ = red / black - = black)
1 connector cable (TIN bus, depending on version)
1 cable binder (depending on version)
9