SHERCO ST Series Workshop Manual page 165

- Tighten the cylinder head fastening
screws using a dynamometer
gauged at 11NM.
- Place and tighten the bracket joining
the chassis to the cylinder head.
- Place the cooling circuit sleeves.
Place and tighten the sleeve fastening
- clamps using specifi c pliers.
Screw in the spark plug.
-
Apply lubricant to the area where the
exhaust pipe joins the muffl er in
- order to facilitate the connection.
- Place the exhaust pipe gasket and
make sure it fi ts correctly.
166
CHANGING THE PISTON
ST SERIES