SHERCO ST Series Workshop Manual page 132

❱❘
FORMULA
- Remove the safety clip.
- Loosen the brake pad fi xation screw.
- Loosen the grasper securing screws.
- Clean the assembly with Minerva Brake
Cleaner.
- Remove the brake pads.
- Measure the depth of the sheathing. The
inner groove measurement should be
no less than 1mm.
- Remove the safety clip.
❱❘
AJP
- Loosen the brake pad fastening screw.
- Loosen the grasper securing screws.
- Remove the brake pads.
- Measure the depth of the lining. This
cannot be less than 1mm.
FRONT BRAKE MAINTENANCE
133