SHERCO ST Series Workshop Manual page 130

CHANGING FRONT FLEXIBLE BRAKE HOSE
❱❘
FORMULA
- Dismantle the front fork bridge and
remove the fl exible brake hose from
the bridge, as well as the upper fl ange.
Dismantle the fl exible brake hose.
- Once the fl exible brake hose has been
changed, fi ll up the tank with DOT4
Minerva brake fl uid.
- Loosen the grasper bleeder and purge
the fl exible brake hose by pressing
successively until the brake lever limit is
reached. Repeat this operation until the
lever at pressure feels to have reached
maximum hardness.
- Fluid level must be checked once
bleeding has been completed.
❱❘
AJP
- Dismantle the fl exible brake hose.
131