DFE WebHandler 3 Instruction Manual page 35

Figure 30 - DIAGNOSTIC SCREENS
Figure 31 - TUNING and DATA TRANSFER SCREENS
Tuning: (see below)
Data Transfer: ALWAYS use this screen to save your setup changes before exiting the program.
Changes not STORED to DEFAULT SETUP will not affect the unit after a power OFF/ON cycle.
Be aware the unit always powers up in the DEFAULT SETUP configuration.(see also (5) below)
To store a setup in your WebHandler:
Select DEFAULT SETUP in the Store Setup As pulldown box. Click the STORE button. You will
be advised when Storing is complete. The unit will power up in your stored configuration now. To
store additional setups for different processes requiring a different setup or tuning, Simply Select a
numbered Setup in the pulldown box, then Click the Store button for each setup. It will be helpful to
document which setup works for each process.
29