Appendix 2: Aim Id Table - 3nStar SC400 Programming Manual

7.2 Appendix 2: AIM ID Table

Symbolog y
EAN-13
EAN-8
UPC-E
UPC-A
Code 128
GS1-128 (UCC/EAN-128)
AIM-128
ISBT-128
Interl eaved 2 of 5
ITF-6
ITF-14
Indust rial 2 of 5
Standard 2 of 5
Code 39
Cod abar
AIM ID
]E0 Standard EAN-13
]E3 EAN-13 + 2/5-Digit Add-On Code
]E4 Standard EAN-8
]E4...]E1... EAN-8 + 2-Digit Add-On Code
]E4...]E2... EAN-8 + 5-Digit Add-On Code
]E0 Standard UPC-E
]E3 UPC-E + 2/5-Digit Add-On Code
]E0 Standard UPC-A
]E3 UPC-A + 2/5-Digit Add-On Code
]C0 Standard Code 128
]C1 FNC1 is the character right after the start character
]C2 FNC1 is the 2nd character after the start character
]C4
]I0 No parity check
]I1 Transmit check digit after parity check
]I3 Do not transmit check digit after parity check
]I1 Transmit check digit
]I3 Do not transmit check digit
]I1 Transmit check digit
]I3 Do not transmit check digit
]S0 Not specified
]R0 No parity check
]R8 One check digit, MOD10; do not transmit check digit
]R9 One check digit, MOD10; transmit check digit
]A0 Transmit barcodes as is; Full ASCII disabled; no parity check
]A1 One check digit, MOD43; transmit check digit
]A3 One check digit, MOD43; do not transmit check digit
]A4 Full ASCII enabled; no parity check
]A5 Full ASCII enabled; transmit check digit
]A7 Full ASCII enabled; do not transmit check digit
]F0 Standard Codabar
]F2 Transmit check digit after parity check
]F4 Do not transmit check digit after parity check
71
Remark