Data Matrix - 3nStar SC400 Programming Manual

6.4 Data Matrix

Restore Factory Defaults
Restore the Facto ry Defaults of Data Matri
Enable/Disable Data Matrix
Enable Data Matr ix Disable Data Matrix
Message Length
Message length can be set to the maximum value, minimum value. The data between the maximum and the minimum is
valid.
The maximum value and minimum value can be set using Programming command .
Please check the programming command guide for the detail.
Example: Set the Barcode Message length of the minimum value is 10, the maximum value is 25,
Programming command
Max: 02360310.
Min: 0236025.
QR Code Page
59