Swegon GLOBAL PX Operation And Maintenance Instructions page 61

8.23 TYPE 22: ALARM INDICATING THAT THE HOURS LIMIT FOR THE MAJOR MAINTENANCE
HAS BEEN REACHED
- Conditions:
• The hours limit must be configured with a value greater than 0.
- Causes:
• The hours limit for the major maintenance has been reached.
The instructions in this manual for the 12 months maintenance should be followed.
Reset the hours for major maintenance after this operation, this will reset automatically the alarm and give it again after the
same period. Reset also minor maintenance hours.
Effects:
Code
M.11
ALARM OUTPUT
/
Operation and maintenance instructions
Displayed on HMI TACtouch
Text displayed
MAJOR MAINTENANCE ALARM
TAC control board
AL dPa OUTPUT
/
Auto reset: via dedicated reset
LED ALARM
ON
Level
1
Fans
/
61