Swegon GLOBAL PX Operation And Maintenance Instructions page 25

5.6 TIME SCHEDULE
The controller allows 6 time slots (channels) to be configured. For each day of the week, the operation mode
can be either AUTO (operate according to time slots) or manual (selection of speed).
For each time slot select :
•
start time
•
Operating mode
•
Speed selection: I, II, III for CA/TQ, normal/reduced for LS/CP and, for all modes, boost level
•
Heating setpoint if postheater is present
•
Cooling setpoint if postcooler is present
Operation and maintenance instructions
25