Switches; Checking The Switch Continuity - Yamaha MX360 Service Manual

A
A
B
W W
W
W

SWITCHES

SWITCHES

CHECKING THE SWITCH CONTINUITY

Use a pocket tester to check the terminals for
continuity. If a continuity error is found at any
point, replace the switch.
Analog pocket tester:
YU-03112-C
Pocket tester:
90890-03112
TIP
9 Set the pocket tester to "0" before starting a
test.
9 To test the switch for continuity, set the
pocket tester to the "Ω × 1" range.
9 Turn the switch ON and OFF several times
during the test.
A A typical example of switch continuity test.
Measurement example of the electric compo-
nents
A Connect the connector and check.
B Disconnect the connector and check.
5-2
ELEC