Yamaha MX360 Service Manual page 13

BASIC SERVICE INFORMATION
2. Check:
9 Lead
9 Coupler
9 Connector
Moisture → Dry with an air blower.
Rust/stains → Connect and disconnect several times.
3. Check:
9 All connections
Loose connection → Connect properly.
TIP
1
9 If the pin 1 on the terminal is flattened, bend it up.
9 After disassembling and assembling a coupler, pull on the leads
to make sure that they are installed securely.
4. Connect:
9 Lead
9 Coupler
9 Connector
TIP
9 When connecting a coupler or connector, push both sections of
the coupler or connector together until they are connected
securely.
9 Make sure all connections are tight.
1-4
GEN
INFO