Yamaha MX360 Service Manual page 14

BASIC SERVICE INFORMATION
5. Check:
9 Continuity
(with the pocket tester)
Analog pocket tester:
YU-03112-C
Pocket tester:
90890-03112
TIP
9 If there is no continuity, clean the terminals.
9 When checking the wire harness, perform steps (1) to (4).
9 Make sure to check the connector and coupler of the TCI unit/
CDI unit when replacing the TCI unit/CDI unit.
9 As a quick remedy, use a contact revitalizer available at most
part stores.
NOTICE
For waterproof couplers, never insert the tester leads directly
into the coupler. When performing any checks using a water-
proof coupler, use the specified test harness or a suitable
commercially available test harness.
1-5
GEN
INFO