Technicolor DWA0120 Setup And User Manual page 64

Customizing the content sharing settings
To change the default settings, proceed as follows:
1 Browse to the DWA0120 web interface.
For more information, see
2 Click Content Sharing. The Content Sharing page appears. Under General status, you can change the following
settings:
Samba name:

Your DWA0120 will share the content to the Samba devices under this name.
 Samba enabled:
Allows you to enable or disable the Samba file sharing server.
 DLNA enabled:
Allows you to enable or disable the DLNA service.
 DLNA name:
Your DWA0120 will share the content with other DLNA devices under this name.
3 When you click show advanced, you will be able to configure the Samba name and DLNA name. On top of that you
can also change the:
Samba workgroup:

Enter the same workgroup as used by your computer(s).
 Samba description:
Add a short description for the DWA0120 shared content.
4 Click Save.
5 All users connected to your DWA0120 can now access the data stored on the storage device(s) that are connected to
your DWA0120.
DMS3-CTC-25-552 v1.0
"4.1.1 Accessing the DWA0120 web interface from your local network" on page
5 Content and Printer Sharing
36.
60