Connecting Your Wired Devices - Technicolor DWA0120 Setup And User Manual

2.3 Connecting your wired devices

To connect Wi-Fi clients, see
To connect a set-top box for digital TV, first look for instructions in the documentation included in your package.
In some cases the set-top box will have to be connected to a dedicated Ethernet port (typically Ethernet port 4).
Requirements
• Both your network device (for example, a computer, a gaming console,...) and your DWA0120 must have a free Ethernet
port.
• Your network device must be configured to obtain an IP address automatically. This should be the default setting.
Ethernet cable
In your package, you may find one or more cables with yellow connectors. These are Ethernet cables that you can use to
connect a local network device (a computer, an Ethernet printer, etc.).
Procedure
Proceed as follows:
1 Connect one end of the Ethernet cable to one of the
2 Connect the other end of the Ethernet cable to your network device.
Your DWA0120 does not support Power over Ethernet (PoE). All network devices that are connected to the
DWA0120 must be powered by their own power source.
3 Your device is now connected to your network.
DMS3-CTC-25-552 v1.0
"3 Wi-Fi" on page 20.
yellow Ethernet ports of your DWA0120:
2 Setting up your DWA0120
17