Modifying The Ip Address - HIKVISION DS-2TD6267-75C4L/W Quick Start Manual

DS-2TD6267-75C4L/W Thermal Bi-Spectrum Network Positioning System Quick Start Guide
STRONG PASSWORD RECOMMENDED − We highly recommend that you create a strong password of
your own choosing (using a minimum of eight characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. We also recommend that you reset your password regularly.
Especially in high security systems, resetting the password monthly or weekly can better protect
your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
4. Click OK to save the password.
You can check whether the activation is completed on the pop-up window. If activation failed, make sure
that the password meets the requirement and then try again.
4.3

Modifying the IP Address

Purpose
To view and configure the system via a LAN (Local Area Network), connect the network system in the same
subnet as your PC. Then, install the SADP software or client software to search and change the IP address
of the network system. We will take modifying the IP Address via SADP software as an example to
introduce IP address modification.
Steps
1. Run the SADP software.
2. Click to select an active device.
3. Change the device IP address to the same subnet as your computer by either modifying the IP address
manually or checking the Enable DHCP checkbox.
QSG DS-2TD6267-75C4L/W 041921NA 19