Activation Via Web Browser; Activation Via Sadp Software - HIKVISION DS-2TD6267-75C4L/W Quick Start Manual

DS-2TD6267-75C4L/W Thermal Bi-Spectrum Network Positioning System Quick Start Guide

4.2.1 Activation via Web Browser

Steps
1. Power on the system, and connect the system to the network.
2. Input the IP address into the Web browser address bar, and click Enter to enter the activation interface.
NOTE: The default IP address of the system is 192.168.1.64.
3. Create a password, and input the password into the password field.
STRONG PASSWORD RECOMMENDED − We highly recommend that you create a strong password of
your own choosing (using a minimum of eight characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. We also recommend that you reset your password regularly.
Especially in high security systems, resetting the password monthly or weekly can better protect
your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
4. Confirm the password.
5. Click OK to activate the system and enter the live view interface.

4.2.2 Activation via SADP Software

SADP software is used for detecting the online device, activating the device, and resetting the password.
Get the SADP software from the supplied disk or the official Website, and install the SADP according to the
prompts. Follow the steps to activate the system.
QSG DS-2TD6267-75C4L/W 041921NA
Figure 16, Activation Interface (Web)
17