Siemens SIMATIC NET RUGGEDCOM i800 Installation Manual page 24

•
•
Security hazard – risk of unauthorized access and/or exploitation.
Make sure to remove the microSD/microSDHC card before decommissioning the
device or sending the device to a third-party.
To insert or remove a microSD/microSDHC card, do the following:
1.
2.
3.
4.
5.
RUGGEDCOM i800
Installation Manual, 01/2021, C79000-G8976-1002-06
Do not expose the microSD/microSDHC card to large magnetic or static electric
fields.
Do not bend or drop the microSD/microSDHC card.
NOTICE
Power down the device.
Unscrew the retention screw and remove the access plate.
1 2
Retention Screw
1
Access Plate
2
MicroSD/MicroSDHC Card
3
Figure 3.2 Inserting/Removing a MicroSD/MicroSDHC Card
Without touching the contacts on the card, insert or remove the microSD/
microSDHC card.
Install the access plate and finger-tighten the retention screw.
Power up the device.
3.3 Inserting/Removing the MicroSD/MicroSDHC Card
3
Device Management
15