Advertisement
Quick Links
Booth in a Bag™ 10ft x 10ft
9'10" Wide x 9'10" Deep,
6'8" Side Height /9'6" Center Height
King Canopy Item #: BIAB10-WH
With 4 Legs, Side Walls, Foot Pads & Roller Bag
WARNING:
Keep all flame and heat sources
away from this tent fabric. Meets
the flammability requirements of
CPAI-84 Section 6 and NFPA-701.
It is not fire proof. The fabric will burn if
Distributed by: PIC America, LTD.
left in continuous contact with
8009 Purfoy Road • Fuquay-Varina, NC 27526
any flame source.
1-800-800-6296 • www.kingcanopy.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for KING CANOPY Booth in a Bag
Summary of Contents for KING CANOPY Booth in a Bag
- Page 1 Booth in a Bag™ 10ft x 10ft 9’10” Wide x 9’10” Deep, 6’8” Side Height /9’6” Center Height King Canopy Item #: BIAB10-WH With 4 Legs, Side Walls, Foot Pads & Roller Bag WARNING: Keep all flame and heat sources away from this tent fabric.
-
Page 2: Parts List
4 Pcs Plastic Foot Pads BALLW 10 Pcs White Elastic Ball Bungee Straps TBIAB1010WH 1 Pc 10’x10’ Booth in a Bag Fitted Cover TBIAB10SW-BS 2 Pcs 10’ Side Wall with Bug Screen Window TBIAB10EW 1 Pc 10’ End Wall TBIAB10EWZ 1 Pc 10’... -
Page 3: Frame Assembly
FRAME ASSEMBLY 3WPC 3WPC PFOOT PFOOT 3WPC PFOOT PFOOT 3WPC 3WPC 3WPC Step 1) Begin by laying out the parts as shown above. Step 2) Start assembly of frame at the center ridge. Connect the center ridge pipe to the 3 way connectors as shown... - Page 4 FRAME ASSEMBLY Step 4) Assemble the other side of roof frame as Step 3) Assemble one side of roof frame. Make sure the bolt shown above following the same directions as in holes face outward as shown and that the 3-Way fitting (3WPC) step 3.
- Page 5 COVER & WALL ASSEMBLY Attach Attach Second First Attach Attach First Second Step 10) Begin attaching ball bungees to the cover Step 9) Pull cover over frame. Make sure the peak of by starting at opposite corners and then attaching the cover lines up with the peak of the frame.
- Page 6 COVER & WALL ASSEMBLY Step 16) Begin hanging the side walls by attaching Step 15) Insert the other 2 legs and attach the leg skirt straps to the footpads on all 4 legs. the velcro straps to the velcro straps on the cover starting from the outside edge of the pipe.
- Page 7 Step 22) Thee are three zippers on the front wall so Step 21) The windows can be rolled up and secured that you can roll up the two sides individually. with the straps. ANCHORING YOUR CANOPY This canopy is designed for use as a temporary structure. After assembly, the canopy MUST BE securely anchored to the ground to prevent damage from winds.
- Page 8 IMPORTANT NOTICE: PLEASE READ CAREFULLY We are confident that you will be completely satisfied with your King Canopy unit. Please take a moment to read the very important information below, and call us with any questions you may have. King Canopy/PIC America, LTD. has no control over wind, snow, ice, rain or any other weather condition and we are in no way responsible for any damage caused by the canopy or to the canopy.
-
Page 9: Product Information
Improper Anchoring, Strong Winds, Rain Snow, or Ice King Canopy/PIC America, LTD. does not guarantee these canopies under strong weather conditions. These canopies are designed to protect against damages caused by sun, rain, tree sap, birds, etc. They are not designed to hold roof loads that accompany snow, ice or heavy rains.
Need help?
Do you have a question about the Booth in a Bag and is the answer not in the manual?
Questions and answers