Install The Swing Arm - Launch TLT235SBA User Manual

LAUNCH Electronic Two-post User's Manual
Fig.10b

10.2.8 Install the swing arm

Install the swing arm as shown In Fig.11
Note:
Before use ,check if the positioning gear mechanism at the
end of arm fits, adjust the Screw s of fixed semi-gear for its
fitness.
During the installation, lubricate the moving parts of swing
arm and carriage if accessory, so that the swing arm can
move freely.
Fig 11
27
(C) Diagtools; www.diagtools.eu; diagtools@diagtools.lv; Pernavas 43A, Riga, Latvia, LV-1009; +37129416069