Advertisement
8. Seat Adjustment: To adjust the seat,
support your weight, then lift up on the
seat adjustment lever and use your legs
to position the seat into a comfortable
position. Release the lever and ensure
that the seat locks into the desired
position.
CAUTION: Once the seat lever is
released, the seat will slide freely on the
trolley.
9. Unpack the console, console mounting
screws, and console install wiring
instructions (620-8657) from the
console box.
10. Set the lower rear panel into place on
the mast, then install the back console
shroud (701-0344-XX).
11. Use a #2 phillips screwdriver and attach
the back shroud of the console to the
console mount using eight (8) pieces
each of the #8-18 x 3/4" pan head
screw (110-3402) and M4 flat washer
(120-3307).
Page 8
Fig. 11
Fig. 12
Fig. 13
Advertisement
