Advertisement
14. After connecting the console to the
base, use a #2 phillips screwdriver to
secure the console front to the rear
shroud using six (6) of the 8-18 x 3/4"
pan head screws.
15. Once the bike is fully assembled and
is in its final position, adjust the rear
leveling feet to ensure the bike is level
and stable. Then use a 19mm open-
ended wrench to tighten the two (2)
1/2" nuts to lock the feet.
16. Install Console. For 10" touchscreen,
skip ahead to page 11.
10" LCD CONSOLE
a.
On the numeric keypad, press
and hold the
keys together. The Service Menu
will display.
Page 10
,
and
Fig. 17
Fig. 18
Fig. 19
Advertisement
