Ethernet Models - Multitech Conduit IP67 200 Series Hardware Manual

SPECIFICATIONS AND RELATED INFORMATION
Voltage Power Down
Mode via
Radio
Command
57VDC POE 41 mA
EGSM (900 MHz)
37VDC POE 46 mA
57VDC POE 36 mA

Ethernet Models

Note:
Multi-Tech Systems, Inc. recommends that you incorporate a 10% buffer into the power source
when determining product load.
Maximum Power: The continuous current during maximum data rate with the LoRa at maximum
power setting.
Tx Pulse: The average peak current during LoRa transmission.
Inrush Charge: The total inrush charge at power on.
Voltage
37VDC POE
57VDC POE
12
Cellular Call
Box
Connection
(No Data)
41 mA
52 mA
41 mA
Idle Measure Average
Measured
Current at Max
Power
49 mA 96 mA
34 mA 71 mA
Average TS Pulse
Measured Average Peak
Current at Current for
Max Power HSDPA/ LTE
153 mA 272 mA
158 mA 2.6 A
110 mA 1.62 A
TS Pulse Average
Peak Current for
HSDPA/ LTE
260 mA
140 mA
®
Conduit IP67 Series 200 Base Station MTCDTIP2 Hardware Guide
Total Inrush Total Inrush
Charge Charge
measured in DURATION
MilliCoulombs during
Powerup
(INRUSH
Duration)
1.06 mC 8.0 mS
1.16 mC 8.98 mS
1.06 mC 8.0 mS
Total Inrush Total Inrush
Charge measured Charge
in MilliCoulombs DURATION
during Powerup
(INRUSH
Duration0
0.818 mC 7.61 mS
0.962 mC 7.70 mS