The Rear Ports - Billion BiPAC 7404V series Quick Start Manual

The Rear Ports

8
7
The LAN 4 can be connected to the computer and console cable. You need a special
console kit in this package to connect the LAN cable of Port 4 when connecting to a PC's
RS-232 port (9-pin serial port).
Port
Power Switch
1
PWR
2
3 RESET
LAN
4
1X
(RJ-45 connector)
Phone
─
1X
5
(RJ-11 connector)
LINE
6 (Router with LINE port
only)
ADSL
7
Antenna
8
(Wireless Router only)
5
6
Power ON/OFF switch
Connect the supplied power adapter to this jack.
After the device is powered on, press it to reset the device or
restore to factory default settings.
1-3 seconds: reset the device
6 seconds above, and power off, power on the device: restore to
factory default settings (this is used when you can not login to
the router, e.g. forgot the password)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
— 4X
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
Connect RJ-11 cable to this port when connecting to an analog
2X
phone set.
Connect RJ-11 cable to this port when connecting to the
telephone wall jack.
Connect the supplied RJ-11 ("telephone") cable to this port
when connecting to the ADSL/telephone network.
Connect the detachable antenna to this port.
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
4
Meaning
3
1
2
3