Transporting And Handling; Lifting The Controller Cabinet - ABB OmniCore C90XT Product Manual

Hide thumbs Also See for OmniCore C90XT:
Table of Contents

Advertisement

3.3 Transporting and handling

3.3.1 Lifting the controller cabinet

Lifting device
Use the four lifting eyes (Torque: 11.3 Nm-12.6 Nm) or a fork lift when lifting the
controller, as shown below.
The following figure shows the maximum angle between the lifting straps when
lifting the controller. The weight of the controller module is detailed in section
Weight on page
xx1900001445
Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
39.
6
° 0
Note
After removing the lifting lock, tighten the plastic screws (Torque: 0.8 Nm-1 Nm)
for the controller cabinet.
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.3.1 Lifting the controller cabinet
53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents