Wire Routes; Fiber Drop Cable Route; Figure 7. Wire Routing - ADTRAN GPON 452 Physical Installation Manual

Installation
5.3.4

Wire Routes

Figure 7

Figure 7. Wire Routing

5.3.4.1

Fiber Drop Cable Route

f
WARNING!
Do not look into the ends of optical fibers. Exposure to invisible LASER radiation may cause
serious retinal damage or even blindness. Verify the optical source is disabled through the use
of an optical power meter before handling optical fibers.
f
CAUTION!
Use caution when routing wires and cables. Avoid severe bending and routing over sharp
edges. Use grommet material when possible to avoid wear on cable insulation.
The Outer Enclosure offers several alternatives for Fiber installation. These include:
■ Pre-terminated Drop cable
■ Drop cable and Field splice or Field termination
For the Splice Housing, the Fiber may be routed through a riser conduit. It can then be
terminated at the bulk head adapter shown in
30
displays the various wire routing and drops for each housing.
Fiber Drop Ground Cable
Cable Power Supply
Customer Phone
Grommet Ethernet
Video
Figure 8.
61287802F1-34B
Revision B