Unpacking The Device; Mounting The Device; Mounting The Device To A Rack - Siemens SIMATIC NET RUGGEDCOM M2100 Installation Manual

Rugged ethernet switches
Table of Contents

Advertisement

6.
2.2

Unpacking the Device

When unpacking the device, do the following:
1.
2.
3.
Note
If any item is missing or damaged, contact Siemens for assistance.
2.3

Mounting the Device

The RUGGEDCOM M2100 is designed for maximum mounting and display flexibility.
It can be equipped with connectors that allow it to be installed in a 48 cm (19 in)
rack or directly on a panel.
Heat generated by the device is channeled outwards from the enclosure. As such, it
is recommended that 2.5 cm (1 in) of space be maintained on all open sides of the
device to allow for some convectional airflow.
For CSA compliant installations, a minimum forced airflow of 0.27 m/s at 400 CFM is
required.
Note that any increase in airflow will result in a reduction of ambient temperature
and improve the long-term reliability of all equipment mounted in the rack space.
Note
For detailed dimensions of the device with either rack or panel hardware installed,
refer to
2.3.1

Mounting the Device to a Rack

The RUGGEDCOM M2100 can be secured to a standard 48 cm (19 in) rack using
separately purchased rack mount adapters. The adapters can be installed at the front
or rear of the chassis.
Each adapter kit includes four adapters.
RUGGEDCOM M2100
Installation Manual, 04/2021, C79000-G8976-1042-17
Configure the device.
Inspect the package for damage before opening it.
Visually inspect each item in the package for any physical damage.
Verify all items are included.
NOTICE
"Dimension Drawings (Page
30)".
Installing the Device
2.2 Unpacking the Device
9

Advertisement

Table of Contents
loading

Table of Contents