Introduction; Accessories; Required Connectors - Sierra Wireless AirPrime EM7690 Hardware Integration Manual

1.

Introduction

The Sierra Wireless EM7690 Embedded Module is a FirstNet-ready (B14 LTE) M.2 module and
provides 4G LTE advanced Pro, 3G (HSPA+, UMTS), and GNSS connectivity for a wide range of
devices and purposes, including business, personal, and portable computing and communication
devices, IoT devices, M2M applications and industrial use cases.
EM7690 Embedded Modules are available in a variety of region-specific and function-specific SKUs.
1.1.

Accessories

A hardware development kit is available for AirPrime M.2 modules. The kit contains hardware
components for evaluating and developing with the module, including:
 Development board
 Cables
 Antennas
 Other accessories
For over-the-air LTE testing, ensure that an appropriate antenna is being used.
1.2.

Required Connectors

Table 1-1 describes the connectors used to integrate the EM7690 Embedded Module into your host
device.
Table 1-1 Required Host-Module Connectors
Connector Type
RF cables — LTE/WCDMA/GNSS
EDGE (67 pin)
SIM
1. Manufacturers/part numbers are for reference only and are subject to change. Choose connectors that are appropriate
for your own design.
411139xx
202041113915
1
 Mate with M.2-spec connectors
 Four connector jacks (mate with I-PEX 20448-001R-081 or
equivalent)
 Slot B compatible — Per the M.2 standard (PCI Express M.2™
Specification Revision 3.0, Version 1.2), a generic 75-pin
position EDGE connector on the motherboard uses a
mechanical key to mate with the 67-pin notched module
connector.
 Manufacturers include LOTES (part #APCI0018-P001A01),
Kyocera, JAE, Tyco, and Longwell.
 Industry-standard connector.
Rev 0.1
Rev 0.3
Description
September 23,
September 23, 2020
1
5