Introduction; Accessories; Required Connectors - Sierra Wireless AirPrime EM7511 Hardware Integration Manual

1: Introduction

The Sierra Wireless EM7511 Embedded Module is an M.2 module that provides LTE,
UMTS, and GNSS connectivity for notebook, ultrabook, tablet computers, and M2M
applications over several radio frequency bands.

Accessories

A hardware development kit is available for AirPrime M.2 modules. The kit contains
hardware components for evaluating and developing with the module, including:
• Development board
• Cables
• Antennas
• Other accessories
For over-the-air LTE testing, ensure that suitable antennas are used.

Required Connectors

Table 1-1 describes the connectors used to integrate the EM7511 Embedded Module
into your host device.
Table 1-1: Required Host–Module Connectors
Connector type
RF cables
EDGE (67 pin)
SIM
Rev Apr.18
Description
Mate with M.2-spec connectors
•
Three connector jacks (I-PEX 20448-001R-081 or equivalent)
•
Slot B compatible—Per the M.2 standard ([8] PCI Express NGFF
•
(M.2) Electromechanical Specification Revision 1.0), a generic
75 pin position EDGE connector on the motherboard uses a
mechanical key to mate with the 67 pin notched module connector.
Manufacturers include LOTES (part #APCI0018-P001A01),
•
Kyocera, JAE, Tyco, and Longwell.
Industry-standard connector.
•
5
1