Installation Reference; Tail Fiber Binding Tape; Structure Of Tail Fiber Binding Tape; Clipping Of Tail Fiber Binding Tape - Raisecom ISCOM6820-GP Installation Manual

Raisecom
ISCOM6820-GP (A) Installation Guide
8

Installation reference

This chapter introduces the installation reference of the ISCOM6820-GP device.




8.1 Tail fiber binding tape

8.1.1 Structure of tail fiber binding tape

The width of tail fiber binding tape is 12.7mm, and the two sides of the binding tape is hook
surface (transparent polypropylene) and rough surface (black nylon) respectively, which
achieves the locking function through coordination. The appearance of tail fiber binding tape
is shown in Figure 8-1.

Figure 8-1 Tail fiber binding tape

8.1.2 Clipping of tail fiber binding tape

Bind the tail fiber according to the following steps:
Step 1 Install the binding tape to the plastic axis on the cutter, as shown in Figure 8-2.
Tail fiber binding tape
Cable label specifications
Introduction and usage of ribbon
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
8 Installation reference
38