Table 6-4 Checklist Of Cables - Raisecom ISCOM6820-GP Installation Manual

Raisecom
ISCOM6820-GP (A) Installation Guide

Table 6-4 Checklist of cables

Power
cable and
grounding
cable
Cable
Item
 The connection is correct and reliable. Power cables, ground cables, and
signal cables are laid separately in the cabinet; the distance among power
cable, ground cables, and signal cables outside the cabinet meet the design
requirements, generally greater than 3cm.
 Wrap wire nose handle and bare wire with heat-shrinkable tubing or
insulating tape. There is no bare copper wire at wire nose and connection
terminal. Flat washers and lock washers are installed correctly.
 Bind the wire evenly and neatly. All wire clips should be aligned towards
the same direction.

The cable routing in the cabinet is correct.

No damage, breakage, and middle joints.
 The plug is clean without damage; plugs made on site should be proper
and plugs connection is correct and reliable.
 The cable routing is in line with the engineering design manual,
convenient for maintenance and capacity expansion.
 Optical fibers, optical interfaces, and flange plates should be connected
reliably.
 Take protective measures for tail fibers laid outside the cabinet, such as
adding bellows and slots.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
6 Checking hardware installation
Requirement
35