Power-On Test; Precautions; Powering On Device; Table 7-1 Power-On Test - Raisecom ISCOM6820-GP Installation Manual

Raisecom
ISCOM6820-GP (A) Installation Guide
7

Power-on test

This chapter introduces the specific contents and precautions of power-on test.




7.1 Precautions

Pay attention to the following precautions during power-on test:




7.2 Powering on device

Conduct the power-on test according to Table 7-1.

Table 7-1 Power-on test

Check
DC/AC
power
Precautions
Powering on device
Power-on check
Conduct the power-on test seriously.
Check the power supplies, components and cables.
If necessary, ask other people to check what is neglected.
Item

Use a multi-meter to test the DC power and ensure that the DC power
voltage is between -38.4 V and -57.6 V.
 Use a multi-meter to test the AC power and ensure that the AC power
voltage is between 100 V to 240 V.
 The power capacity must be able to support the ISCOM6820-GP to work
at the maximum power consumption.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Requirement
7 Power-on test
36